Management

The Management application is where you perform your run time configuration of Siren Investigate, including both the initial setup and ongoing configuration of index patterns, advanced settings that tweak the behaviors of Siren Investigate itself, and the various "objects" that you can save throughout Siren Investigate such as entity tables and searches, visualizations, and dashboards.

Entity tables

To use Siren Investigate, you have connect to the Elasticsearch indices that you want to explore, by configuring one or more entity tables.

For more information, see Creating entity tables.

You can also:

  • Create scripted fields that are computed on the fly from your data. You can browse and visualize scripted fields, but you cannot search them.

  • Set advanced options such as the number of rows to show in a table and how many of the most popular fields to show. Note: Use caution when modifying advanced options, as it is possible to set values that are incompatible with one another.

  • Configure Siren Investigate for a production environment.

Elasticsearch supports the ability to run search and aggregation requests across multiple clusters using a module called cross-cluster search.

Siren Federate does not currently support cross-cluster search.

To take advantage of cross-cluster search, you must configure your Elasticsearch clusters accordingly. Refer to the corresponding Elasticsearch documentation before attempting to use cross-cluster search in Siren Investigate.

After your Elasticsearch clusters are configured for cross-cluster search, you can create specific index patterns in Siren Investigate to search across the clusters of your choosing. Using the same syntax that you would use in a raw cross-cluster search request in Elasticsearch, create your index pattern in Siren Investigate with the convention <cluster-names>:<pattern>.

For example, if you want to query logstash indices across two of the Elasticsearch clusters that you set up for cross-cluster search, which were named cluster_one and cluster_two, you would use cluster_one:logstash-*,cluster_two:logstash-* as your index pattern in Siren Investigate.

Just like in raw search requests in Elasticsearch, you can use wildcards in your cluster names to match any number of clusters, so if you wanted to search logstash indices across any clusters named cluster_foo, cluster_bar, and so on, you would use cluster_*:logstash-* as your index pattern in Siren Investigate.

If you want to query across all Elasticsearch clusters that have been configured for cross cluster search, then use a standalone wildcard for your cluster name in your Siren Investigate index pattern: *:logstash-*.

After an index pattern is configured using the cross-cluster search syntax, all searches and aggregations using that index pattern in Siren Investigate take advantage of cross-cluster search.

Advanced settings for relations

You can set a maximum time spent by each join task for a relation in milliseconds. When the timeout has expired, the task passes the documents accumulated at that point on to the next task. This can be overwritten by individual relations.

This is a per-task time limit. As each join contains several tasks, the overall response to the request can be a number of multiples of the set timeout. As a semi-join, these documents are filtered based on the presence of a non-empty value for the join field in the other index pattern in the relation. The index pattern in question is then filtered by the values returned.

To set a global timeout:

  • Go to Management > Advanced settings and edit siren:joinTaskTimeout.

Complex relations

In Siren Investigate Complex relations leverage complex joins to connect one or more fields between source and target entity tables. Complex relations can be constructed using either a single condition with a comparison operator, i.e. gt gte lt lte contains intersects or within. Or alternatively, they can be created by combining multiple conditions with one or more eq equality operators as well as any of the comparison operators.

Complex joins are enabled since Siren Federate v31 which uses extended join condition syntax to retrieve documents from connected indices.

Complex relations are resource intensify as they currently only support the index join.

For information about creating and editing relations, see Creating relations.

Minimizing expensive queries

Dashboards connected to large datasets can produce queries that are expensive to process if the operation on the data does not limit the data being queried, for example, when a filter is removed or a broad time range is set.

To help prevent this, some limits can be set on the entity tables and the associated dashboards.

To set the limits, go to the Data model app, select the entity table or search to limit, then go to the Options tab.

For example, the time range of the search might be limited to the last thirty days. An associated dashboard can only be navigated to if there are fewer than five thousand documents, but there are no limits on the number of documents that the dashboard can display.

Users can be permitted to override warnings by setting the investigate override expensive queries limits permission in the ACL plugin. If permitted, the warnings will still be displayed but the user will be able to explicitly allow the operation.

Limit time range

For time based indices, the maximum time range can be defined. Setting a longer time range will be prevented by the system and a warning will be displayed.

Limit the maximum number of documents per dashboard

The maximum number of documents that can be displayed on a dashboard can be set. If the filters are changed to show a larger number of documents, the system will not allow the operation and show a warning.

Limit the maximum number of documents on the dashboards in a join operation

If you attempt to make a join between two dashboards by using the relational navigator and the number of documents on one or both of the dashboards exceeds the limit, the navigation is prevented and a warning message is displayed. Expensive Join Warning

Datasources

For an overview of datasources, see Siren Investigate datasource configuration.

Managing fields

The fields for the index pattern are listed in a table. Click a column header to sort the table by that column. Click Controls in the rightmost column for a given field to edit the field’s properties. You can manually set the field’s format from the Format box. Format options vary based on the field’s type.

You can also set the field’s popularity value in the Popularity text entry box to any desired value. Click Update Field to confirm your changes or Cancel to return to the list of fields.

Siren Investigate has field formatters for the following field types:

String field formatters

String fields support the String and URL formatters.

The String field formatter can apply the following transformations to the field’s contents:

  • Convert to lowercase.

  • Convert to uppercase.

  • Convert to title case.

  • Apply the short dots transformation, which replaces the content before a . character with the first character of that content, as in the following example:

Original

Becomes

com.organizations.project.ClassName

c.o.p.ClassName

The URL field formatter can take on the following types:

  • The Link type turn the contents of the field into a URL.

  • The Image type can be used to specify an image folder where a specified image is located.

You can customize either type of URL field formats with templates. A URL template enables you to add specific values to a partial URL. Use the string {{value}} to add the contents of the field to a fixed URL.

For example, when:

  • A field contains a user ID.

  • That field uses the URL field formatter.

  • The URI template is http://company.net/profiles?user_id={­{value}­}.

The resulting URL replaces {{value}} with the user ID from the field.

The {{value}} template string URL-encodes the contents of the field. When a field encoded into a URL contains non-ASCII characters, these characters are replaced with a % character and the appropriate hexadecimal code. For example, field contents users/admin result in the URL template adding users%2Fadmin.

When the formatter type is set to Image, the {{value}} template string specifies the name of an image at the specified URI.

To pass unescaped values directly to the URL, use the {{rawValue}} string.

A Label Template enables you to specify a text string that displays instead of the raw URL. You can use the {{value}} template string normally in label templates. You can also use the {{url}} template string to display the formatted URL.

Date field formatters

Date fields support the Date, Url, and String formatters.

The Date formatter enables you to choose the display format of date stamps using the moment.js standard format definitions.

The String field formatter can apply the following transformations to the field’s contents:

  • Convert to lowercase

  • Convert to uppercase

  • Convert to title case

  • Apply the short dots transformation, which replaces the content before a . character with the first character of that content, as in the following example:

Original

Becomes

com.organizations.project.ClassName

c.o.p.ClassName

The URL field formatter can take on the following types:

  • The Link type turn the contents of the field into a URL.

  • The Image type can be used to specify an image folder where a specified image is located.

You can customize either type of URL field formats with templates. A URL template enables you to add specific values to a partial URL. Use the string {{value}} to add the contents of the field to a fixed URL.

For example, when:

  • A field contains a user ID.

  • That field uses the URL field formatter.

  • The URI template is http://company.net/profiles?user_id={­{value}­}.

The resulting URL replaces {{value}} with the user ID from the field.

The {{value}} template string URL-encodes the contents of the field. When a field encoded into a URL contains non-ASCII characters, these characters are replaced with a % character and the appropriate hexadecimal code. For example, field contents users/admin result in the URL template adding users%2Fadmin.

When the formatter type is set to Image, the {{value}} template string specifies the name of an image at the specified URI.

To pass unescaped values directly to the URL, use the {{rawValue}} string.

A Label Template enables you to specify a text string that displays instead of the raw URL. You can use the {{value}} template string normally in label templates. You can also use the {{url}} template string to display the formatted URL.

Geographic point field formatters

Geographic point fields support the String formatter.

The String field formatter can apply the following transformations to the field’s contents:

  • Convert to lowercase

  • Convert to uppercase

  • Convert to title case

  • Apply the short dots transformation, which replaces the content before a . character with the first character of that content, as in the following example:

Original

Becomes

com.organizations.project.ClassName

c.o.p.ClassName

Numeric field formatters

Numeric fields support the URL, Bytes, Duration, Number, Percentage, String, and Color formatters.

The URL field formatter can take on the following types:

  • The Link type turn the contents of the field into a URL.

  • The Image type can be used to specify an image folder where a specified image is located.

You can customize either type of URL field formats with templates. A URL template enables you to add specific values to a partial URL. Use the string {{value}} to add the contents of the field to a fixed URL.

For example, when:

  • A field contains a user ID

  • That field uses the URL field formatter

  • The URI template is http://company.net/profiles?user_id={­{value}­}

The resulting URL replaces {{value}} with the user ID from the field.

The {{value}} template string URL-encodes the contents of the field. When a field encoded into a URL contains non-ASCII characters, these characters are replaced with a % character and the appropriate hexadecimal code. For example, field contents users/admin result in the URL template adding users%2Fadmin.

When the formatter type is set to Image, the {{value}} template string specifies the name of an image at the specified URI.

To pass unescaped values directly to the URL, use the {{rawValue}} string.

A Label Template enables you to specify a text string that displays instead of the raw URL. You can use the {{value}} template string normally in label templates. You can also use the {{url}} template string to display the formatted URL.

The String field formatter can apply the following transformations to the field’s contents:

  • Convert to lowercase

  • Convert to uppercase

  • Convert to title case

  • Apply the short dots transformation, which replaces the content before a . character with the first character of that content, as in the following example:

Original

Becomes

com.organizations.project.ClassName

c.o.p.ClassName

The Duration field formatter can display the numeric value of a field in the following increments:

  • Picoseconds

  • Nanoseconds

  • Microseconds

  • Milliseconds

  • Seconds

  • Minutes

  • Hours

  • Days

  • Weeks

  • Months

  • Years

You can specify these increments with up to 20 decimal places for both input and output formats. The default number of decimals for the Number format is 3, i.e. 0,0.[000]. If there are values smaller than this, but larger than 1e-7, they will be rounded to 0. The fix is to change the Numeral.js format pattern to: 0,0.[0000000]

The Color field formatter enables you to specify colors with specific ranges of values for a numeric field.

When you select the Color field formatter, Siren Investigate displays the Range, Font Color, Background Color, and Example fields.

Click Add Color to add a range of values to associate with a particular color. You can click in the Font Color and Background Color fields to display a color picker. You can also enter a specific hex code value in the field. The effect of your current color choices are displayed in the Example field.

image

The Bytes, Number, and Percentage formatters enable you to choose the display formats of numbers in this field using the numeral.js standard format definitions.

Range field formatters

Range fields support their default formatters, which are date_range, ip_range, and numeric_range. These fields are represeneted in JSON format.

An example of an integer_range field appears as follows:

  {
    "gte": 1,
    "lte": 200
  }

ip_range fields in CIDR subnet mask notation are displayed as simple strings. For example:

  192.168.0.0/16

Scripted fields

Scripted fields compute data on the fly from the data in your Elasticsearch indices. Scripted field data is shown on the Discover tab as part of the document data, and you can use scripted fields in your visualizations. Scripted field values are computed at query time so they are not indexed and cannot be searched. Note that Siren Investigate cannot query scripted fields.

Computing data on the fly with scripted fields can be very resource intensive and can have a direct impact on Siren Investigate’s performance. Keep in mind that there’s no built-in validation of a scripted field. If your scripts are buggy, you will get exceptions whenever you try to view the dynamically generated data.

When you define a scripted field in Siren Investigate, you have a choice of scripting languages. Starting with 5.0, the default options are Lucene expressions and Painless. While you can use other scripting languages if you enable dynamic scripting for them in Elasticsearch, this is not recommended because they cannot be sufficiently sandboxed.

You can reference any single value numeric field in your expressions, for example:

doc['field_name'].value

For more background on scripted fields and additional examples, refer to Using Painless in Kibana scripted fields.

Creating a scripted field

  1. Go to Settings > Indices.

  2. Select the index pattern you want to add a scripted field to.

  3. Go to the pattern’s Scripted Fields tab.

  4. Click Add Scripted Field.

  5. Enter a name for the scripted field.

  6. Enter the expression that you want to use to compute a value on the fly from your index data.

  7. Click Save Scripted Field.

For more information about scripted fields in Elasticsearch, see Scripting.

Modifying a scripted field

  1. Go to Settings > Indices

  2. Click Edit for the scripted field you want to change.

  3. Make your changes and then click Save Scripted Field to update the field.

Deleting a scripted field

  1. Go to Settings > Indices.

  2. Click Delete for the scripted field you want to remove.

  3. Confirm that you really want to remove the field.

Setting advanced options

The Advanced Settings page enables you to directly edit settings that control the behavior of the Siren Investigate application. For example, you can change the format used to display dates, specify the default index pattern, and set the precision for displayed decimal values.

  1. Go to Management > Advanced Settings.

  2. Click Edit for the option you want to modify.

  3. Enter a new value for the option.

  4. Click Save.

Modifying the following settings can significantly affect Siren Investigate’s performance and cause problems that are difficult to diagnose. Setting a property’s value to a blank field will revert to the default behavior, which may not be compatible with other configuration settings. Deleting a custom setting removes it from Siren Investigate permanently.
Table 1. Common settings
Name Description Example

sentinl:experimental

Enable experimental features in Siren Alert.

false

default:highlight-type

Sets the default highlighter type for highlighted query matches. Siren Investigate applies Lucene highlighter methods to compute how the highlighting is applied to the text. The two types of highlighter are unified and plain. For more information, see the Elasticsearch documentation.

unified

query:queryString:options

Options for the Lucene query string parser.

{ "analyze_wildcard": true }

sort:options

Options for the Elasticsearch sort parameter.

{ "unmapped_type": "boolean" }

dateFormat

The format to use for displaying formatted dates.

DD/MM/YYYY

dateFormat:tz

The timezone that Siren Investigate uses. The default value of Browser uses the timezone detected by the browser.

Browser

dateFormat:scaled

These values define the format used to render ordered time-based data. Formatted timestamps must adapt to the interval between measurements. Keys are ISO8601 intervals.

[ ["", "HH:mm:ss.SSS"], ["PT1S", "HH:mm:ss"], ["PT1M", "HH:mm"], ["PT1H", "YYYY-MM-DD HH:mm"], ["P1DT", "YYYY-MM-DD"], ["P1YT", "YYYY"] ]

dateFormat:dow

This property defines what day weeks should start on.

Sunday

defaultColumns

Default is _source. Defines the columns that appear by default on the Discover page.

_source

metaFields

An array of fields outside of _source. Siren Investigate merges these fields into the document when displaying the document.

_source, _id, _type, _index, _score

discover:sampleSize

The number of rows to show in the Discover table.

50

discover:aggs:terms:size

Determines how many terms will be visualized when clicking the "visualize" button, in the field boxes, in the discover sidebar. The default value is 20.

20

doc_table:highlight

Highlight results in Discover and Saved Searches Dashboard. Highlighting makes request slow when working on big documents. Set this property to false to switch off highlighting.

true

courier:maxSegmentCount

Siren Investigate splits requests in the Discover page into segments to limit the size of requests sent to the Elasticsearch cluster. This setting constrains the length of the segment list. Long segment lists can significantly increase request processing time.

30

courier:ignoreFilterIfFieldNotInIndex

Set this property to true to skip filters that apply to fields that do not exist in a visualization’s index. Useful when dashboards consist of visualizations from multiple index patterns.

false

fields:popularLimit

This setting governs how many of the top most popular fields are shown.

10

histogram:barTarget

When date histograms use the auto interval, Siren Investigate attempts to generate this number of bars.

50

histogram:maxBars

Date histograms are not generated with more bars than the value of this property, scaling values when necessary.

100

visualization:tileMap:maxPrecision

The maximum geohash precision displayed on tile maps: 7 is high, 10 is very high, 12 is the maximum. Explanation of cell dimensions.

7

visualization:tileMap:WMSdefaults

Default properties for the WMS map server support in the coordinate map.

{ "enabled": false, "url": "https://basemap.nationalmap.gov/arcgis/services/USGSTopo/MapServer/WMSServer", "options": { "version": "1.3.0", "layers": "0", "format": "image/png", "transparent": true, "attribution": "Maps provided by USGS", "styles": "" } }

visualization:regionMap:showWarnings

Whether the region map shows a warning when terms cannot be joined to a shape on the map.

true

visualization:colorMapping

Maps values to specified colors within visualizations.

{"Count":"#6eadc1"}

visualization:loadingDelay

Time to wait before dimming visualizations during query.

2s

visualization:dimmingOpacity

When part of a visualization is highlighted, by moving the mouse pointer over it for example, this is the opacity applied to the other elements. A higher number means other elements will be less opaque.

0.5

csv:separator

A string that serves as the separator for exported values.

,

csv:quoteValues

Set this property to true to quote exported values.

true

history:limit

In fields that have history, such as query inputs, the value of this property limits how many recent values are shown.

10

shortDots:enable

Set this property to true to shorten long field names in visualizations. For example, instead of foo.bar.baz, show f.b.baz.

false

truncate:maxHeight

This property specifies the maximum height that a cell occupies in a table. A value of 0 switches off truncation.

115

format:defaultTypeMap

A map of the default format name for each field type. Field types that are not explicitly mentioned use "default".

{ "ip": { "id": "ip", "params": {} }, "date": { "id": "date", "params": {} }, "number": { "id": "number", "params": {} }, "boolean": { "id": "boolean", "params": {} }, "date_range": { "id": "date_range", "params": {} }, "ip_range": { "id": "ip_range", "params": {} }, "numeric_range": { "id": "numeric_range", "params": {} }, "source": { "id": "_source", "params": {} }, "_default": { "id": "string", "params": {} }}

format:number:defaultPattern

Default numeral format for the "number" format.

0,0.[000]

format:bytes:defaultPattern

Default http://numeraljs.com/[numeral format]  numeral format for the "bytes" format.

0,0.[000]b

format:percent:defaultPattern

Default http://numeraljs.com/[numeral format]  numeral format for the "percent" format.

0,0.[000]%

format:currency:defaultPattern

Default http://numeraljs.com/[numeral format]  numeral format for the "currency" format.

($0,0.[00])

savedObjects:perPage

The number of objects shown on each page of the list of saved objects. The default value is 5.

5

savedObjects:listingLimit

Number of objects to fetch for the listing pages.

1000

timepicker:timeDefaults

The default time filter selection.

{ "from": "now-15m", "to": "now", "mode": "quick" }

timepicker:refreshIntervalDefaults

The time filter’s default refresh interval.

{ "display": "Off", "pause": false, "value": 0 }

dashboard:defaultDarkTheme

Set this property to true to make new dashboards use the dark theme by default.

false

filters:pinnedByDefault

Set this property to true to make filters have a global state by default.

false

filterEditor:suggestValues

Set this property to true to have the filter editor suggest values for fields, instead of providing only a text input. This may result in heavy queries to Elasticsearch.

false

notifications:banner

You can specify a custom banner to display temporary notices to all users. This field supports Markdown.

notifications:lifetime:banner

Specifies the duration in milliseconds for banner notification displays. The default value is 3000000. Set this field to Infinity to switch off banner notifications.

3000000

notifications:lifetime:error

Specifies the duration in milliseconds for error notification displays. The default value is 300000. Set this field to Infinity to switch off error notifications.

300000

notifications:lifetime:warning

Specifies the duration in milliseconds for warning notification displays. The default value is 10000. Set this field to Infinity to switch off warning notifications.

10000

notifications:lifetime:info

Specifies the duration in milliseconds for information notification displays. The default value is 5000. Set this field to Infinity to switch off information notifications.

5000

metrics:max_buckets

The maximum numbers of buckets that cannot be exceeded. For example, this can arise when the user selects a short interval like (for example 1s) for a long time period (for example 1 year).

2000

state:storeInSessionStorage

[experimental] Siren Investigate tracks UI state in the URL, which can lead to problems when there is a lot of information there and the URL gets very long. Enabling this will store parts of the state in your browser session instead, to keep the URL shorter.

true

indexPattern:placeholder

The placeholder for the field "Index name or pattern" in the "Settings > Indices" tab.

logstash-*

context:defaultSize

The number of surrounding entries to show in the context view.

5

context:step

The step size to increment or decrement the context size by.

5

context:tieBreakerFields

A comma-separated list of fields to use for tie breaking between documents that have the same timestamp value. From this list the first field that is present and sortable in the current index pattern is used.

_doc

timelion:showTutorial

Set this property to true to show the Timelion tutorial to users when they first open Timelion.

false

timelion:es.timefield

Default field containing a timestamp when using the .es() query.

@timestamp

timelion:es.default_index

Default index when using the .es() query.

_all

timelion:target_buckets

Used for calculating automatic intervals in visualizations, this is the number of buckets to try to represent.

200

timelion:max_buckets

Used for calculating automatic intervals in visualizations, this is the maximum number of buckets to represent.

2000

timelion:default_columns

The default number of columns to use on a Timelion sheet.

2

timelion:default_rows

The default number of rows to use on a Timelion sheet.

2

Table 2. Siren Investigate settings
Name Description Example

siren:timePrecision

Set to generate time filters with certain precision; possible values are: y, M, w, d, h, m, s, ms. It is set to m (minute) by default, to make the best use of Federate cache on time-based data. However, if the data is updated live and better precision is needed, it can be set to s (second) or ms (millisecond).

s

siren:joinTaskTimeout

Default timeout for join task in milliseconds. Join tasks will return the results gathered at that point when the timeout expires. Set to 0 to disable the global timeout. Can be overwritten per relation in each relation’s advanced options in the relational panel.

0

siren:panel_vertical_size

Set to change the default vertical panel size.

3

siren:vertical_grid_resolution

Set to change vertical grid resolution.

100

siren:enableAllRelBtnCounts

Enable counts on all relational buttons.

true

siren:defaultDashboardld

The dashboard that is displayed when clicking the Dashboard tab for the first time.

null

siren:excludedIndices

A comma separated list of indices / patterns to exclude when performing searches against wildcard patterns.

.kibi*, .siren*, .searchguard, .security, .monitoring*, watcher_alarms-*

siren:graphStatesLimit

Set how many undo/redo steps you want to maintain in memory

10

siren:graphExpansionLimit

Limit the number of elements to retrieve during the graph expansion.

500

siren:countFetchingStrategyDashboards

Strategy for fetching dashboard counts. The parameters instruct the count manager how to issue queries to Elasticsearch; this is used to improve performance when indices contain very large numbers of documents.name - Any string batchSize - how many counts to request in a single query retryOnError - how many retry attempts to make if any requests fail parallelRequests - how many requests to send together at any given time

{ "name": "default", "batchSize": 2, "retryOnError": 1, "parallelRequests": 1 }

siren:countFetchingStrategyRelationalFilters

Strategy for fetching counts for relational filters. Parameters are the same as for countFetchingStrategyDashboards. If the name in both is the same, the count manager will mix the queries for counts on dashboards and relational buttons together.

{ "name": "default", "batchSize": 2, "retryOnError": 1, "parallelRequests": 1 }

siren:showIntroVideos

Enable introductory videos.

true

siren:elasticsearch:searchErrorTrace

Return stack_trace in search or msearch error responses if true.

true

siren:autoRelations:shardTimeout

Milliseconds reserved for computing a single Fingerprints/Relations Wizard request. Requests will return the results gathered at that point when the timeout expires, possibly leading to suboptimal overall results. It does not apply to virtual indices.

5000

Managing entity tables, visualizations, and dashboards

You can view, edit, and remove entity tables, visualizations, and dashboards from Settings > Objects. You can also export or import sets of entity tables, visualizations, and dashboards.

Viewing a saved object displays the selected item in the Discover, Visualize, or Dashboard page. To view a saved object:

  1. Go to Management > Saved Objects.

  2. Select the object you want to view.

  3. Click the View button.

Editing a saved object enables you to directly modify the object definition. You can change the name of the object, add a description, and modify the JSON that defines the object’s properties.

If you attempt to access an object whose index has been removed, Siren Investigate displays its Edit Object page. You can:

  • Recreate the index so you can continue using the object.

  • Remove the object and recreate it using a different index.

  • Change the index pattern to match new index by editing indexPattern.pattern to point to an existing index pattern. This is useful if the index you were working with has been renamed.

No validation is performed for object properties. Submitting invalid changes will render the object unusable. Generally, you should use the Discover, Visualize, or Dashboard pages to create new objects instead of directly editing existing ones.

To edit a saved object:

  1. Go to Management > Saved Objects.

  2. Select the object you want to edit.

  3. Click the Edit button.

  4. Make your changes to the object definition.

  5. Click the Save Object button.

To remove a saved object:

  1. Go to Management > Saved Objects.

  2. Select the object you want to remove.

  3. Click Delete.

  4. Confirm that you really want to remove the object.

To export a set of objects:

  1. Go to Management > Saved Objects.

  2. Select the type of object you want to export. You can export a set of dashboards, entity tables, or visualizations.

  3. Click the selection box for the objects you want to export, or click the Select All box.

  4. To export the selected objects without their dependant saved objects, click Export. To attach the dependent saved object(s) click Export with dependencies.

  5. Select a location to write the exported JSON.

If dashboards are exported without dependencies, they do not include their associated index patterns, visualizations or any other objects. Recreate these objects manually before importing saved dashboards to a Siren Investigate instance running on another Elasticsearch cluster. To include all objects, click Export with dependencies.

To import a set of objects that doesn’t exist in your connected Elasticsearch cluster:

  1. Go to Management > Saved Objects.

  2. Click Import to navigate to the JSON file representing the set of objects to import.

  3. Click Open after selecting the JSON file.

To import a set of objects that already exist in Elasticsearch cluster:

  1. Go to Management > Saved Objects.

  2. Click Import to navigate to the JSON file representing the set of objects to import.

  3. Click Open after selecting the JSON file.

  4. In the Duplicates Saved Objects Found modal, the following options can be chosen:

    • Overwrite all existing objects with imported objects - This would update all objects in the Elasticsearch with the imported objects

    • Do not overwrite existing objects - This would ignore the duplicate objects from the imported set of objects. Only the new objects will be imported.

    • Decide for each object - Here we can decide for each duplicate object from the imported set of objects whether to choose the Existing object in the Elasticsearch or the Imported Object.

  5. Click Confirm to import the selected objects.

Adding custom icon packs

You can import custom icons into the application, see Adding custom icons.